Home > News > Content

Application And Prospects Of PA6, PA66, PA12 And Other Nylon Materials in The Automotive Industry

Sep 19, 2024

The production capacity of my country's automobile industry is growing rapidly, and the automotive engineering plastics industry has broad development space. Engineering plastics are replacing metal materials and are gradually expanding from decorative parts to structural parts and functional parts.

 

PA is an excellent engineering plastic with very stable chemical properties and excellent resistance to lubricants and gasoline. In the social context of energy conservation and emission reduction, the penetration rate of PA materials in the automotive industry is gradually increasing due to its advantages in lightweight, heat resistance, oil resistance, flame retardancy and other aspects. At present, PA materials are used in automobile engine systems, electrical systems, and chassis systems, as shown in the table below.

 

640

Photo taken at the Arkema booth

 

The usage of PA6 and PA66 accounts for more than 90% of the total amount of various PA materials. PA11 and PA12 have good flexibility, corrosion resistance, oil resistance and dimensional stability, and are also widely used in fuel pipes, fuel caps, brake pipes and other parts.

 

2

Photo taken at the Arkema booth

 

Typical applications of PA6 materials in automobiles
 

 

The battery box is mainly used to protect and support components such as power battery modules, battery temperature control systems, and battery management systems to prevent the power battery system from being damaged by external impact or mechanical stress. The battery box is of great significance to the mechanical safety of the power battery system, so it has high requirements for mechanical properties such as impact strength and tensile strength.

 

At present, some battery boxes are made of PA materials, most of which are PA6 materials. Flame retardant performance is also an important reference indicator for the selection of battery box materials for new energy vehicles. The limiting oxygen index of unmodified PA6 materials is generally only 20% to 22%, and the flame retardant grade can only reach UL94 V-2 level, which is difficult to meet the strict flame retardant requirements of new energy vehicles and needs to be flame retardant modified.

 

3

PA6 Photo taken at the Sanfangxiang booth

 

Generally speaking, flame retardants used for PA6 include halogen, phosphorus, nitrogen and other types. Among them, halogen flame retardants produce corrosive gases and carcinogenic smoke during combustion. Their use was restricted after the European Union issued the "Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment" in early 2003.

 

In recent years, many researchers have conducted research on halogen-free flame-retardant PA6 materials and achieved many results.

 

Many engineering plastics companies are also committed to the research and development of halogen-free flame-retardant PA6 materials. For example, Lanxess Group has launched three PA6-based Tepex materials. Tepex materials contain a high fiber content, so they not only have extremely high stiffness, strength and energy absorption levels, but also have UL94 V-0 grade flame retardant properties.

 

4

LANXESS lightweight composite materials based on polyamide 6

 

Among them, Tepex dynalite 102fr-RG600(x)/47% is reinforced with coarse roving glass fibers. These fibers are arranged in a multi-axial manner, which can not only achieve good flame retardant effects, but also accurately match the load paths in the components. It can be applied to high-voltage components such as control unit housings, partitions, and covers of new energy vehicle battery boxes.

 

5

 LANXESS launches battery bracket made of Tepex continuous fiber-reinforced thermoplastic composites

 

The application of long glass fiber reinforced PA6 in automotive structural parts is also gradually popularized. Glass fiber runs through the PA6 matrix as a reinforcing skeleton, which can effectively enhance the impact resistance, creep resistance and dimensional stability of plastic products. Long glass fiber reinforced PA6 has many advantages comparable to metals and is suitable for making complex automotive module products.

 

Take the instrument panel crossbeam as an example. The instrument panel crossbeam is directly connected to the body, bears and transmits the load of human-machine interaction equipment and decorative parts, and forms a cockpit safety system with other safety components, which directly affects the handling and safety of the car. The instrument panel crossbeam can buffer the impact force transmitted by the front cabin during a frontal collision and provide support for the explosion of the passenger airbag.

 

In addition, the system composed of the instrument panel crossbeam, steering wheel and steering column needs to meet certain NVH modal requirements to avoid resonance.

 

The long glass fiber reinforced PA6 instrument panel crossbeam has been successfully developed and widely used in some models. While fully meeting the rigidity and strength that the instrument panel crossbeam must have as a load-bearing component, the long glass fiber reinforced PA6 instrument panel crossbeam has excellent creep resistance and fatigue resistance as well as outstanding high and low temperature impact resistance. The design of the all-plastic instrument panel crossbeam not only improves production efficiency, but also helps achieve lightweight and NVH goals.

 

Typical applications of PA12 materials in automobiles
 

 

In the field of traditional internal combustion engine vehicles, large engineering plastics companies such as DuPont, Arkema, and Basf have developed PA12 materials with different temperature resistance grades, which are widely used in oil and gas pipelines such as fuel tank filling pipes, fuel delivery pipes, crankcase ventilation pipes, engine intake pipes, and vacuum brake pipes.

 

6

Photo taken at the BASF booth

 

7

Photo taken at the Evonik booth

 

However, since PA12's high temperature resistance is not outstanding, it cannot be used for a long time in pipes with high working temperatures. For example, the engine cooling water pipes of internal combustion engine vehicles generally still use metal or rubber pipes instead of PA12 pipes. Generally speaking, the operating temperature of the motor cooling system of new energy vehicles is generally lower than 80°C, and the operating temperature of the battery cooling system is generally lower than 60°C. The PA12 material can fully meet the temperature resistance requirements of the cooling system of new energy vehicles.

 

Compared with rubber pipes, PA12 pipes can effectively reduce the quality of the system. The density of PA12 is 1.02g/cm3, while the density of EPDM rubber often used in traditional automotive pipes is 1.1~1.2g/cm3. At the same time, the wall of PA12 pipes is relatively thin. Taking the pipe with an inner diameter of 15~18mm as an example, the PA12 water pipe is only 1.25~1.5mm, while the wall thickness of EPDM rubber pipes is generally 3.5~4mm.

 

8

Photo taken at the UBE booth UBE PA12 hose

 

Comprehensive calculation shows that the use of PA12 material can reduce the weight of the pipeline by 65%. For example, a certain model of Guangzhou Automobile Group Co., Ltd. adopts the PA12 pipeline solution. Compared with traditional metal and rubber pipelines, the mass of the pipeline system is actually reduced by 56%.

 

In addition, since the EPDM rubber material has a low rigidity, if it is used for longer pipelines, more fixed points need to be set. Therefore, in the cooling system of traditional internal combustion engine vehicles, longer pipelines are generally made of metal materials, and EPDM rubber materials are only used in the transition part. In the matching scheme of metal pipelines and rubber pipelines, there are a large number of transition parts, which not only greatly increases the number of parts, but also increases the risk of leakage.

 

The PA12 pipeline has a high rigidity, and a complete water pipe can be manufactured in an integrated molding method, which effectively reduces the number of parts and improves the reliability of the system. For example, a certain model of Guangzhou Automobile Group Co., Ltd. adopts the PA12 pipeline solution. Compared with traditional metal and rubber pipelines, the number of parts in the pipeline system is reduced by 77%. Compared with metal pipelines and rubber pipelines, PA12 pipelines are lighter, more rigid, occupy less space, and have higher reliability, which is of great promotion value in new energy vehicles.

 

In addition, many researchers have conducted research on PA12 pipelines that meet the needs of other specific scenarios. For example, Japan's Toray Company and Polyplastics-Evonik have jointly developed a three-layer extruded tube. The outer layer of PA12 material and the inner layer of polyphenylene sulfide PPS resin material of this extruded tube are bonded together with a special adhesive. It can not only withstand a high temperature of 130°C, but also has good hydrolysis resistance and heat resistance. It can be used in automotive cooling pipeline systems with higher temperature requirements.

 

Because PA12 has good permeability resistance to gasoline, it has been verified to be a safe and reliable fuel pipeline material. However, with the emergence and use of mixed fuels with methanol or ethanol, higher requirements have been placed on the permeability resistance of fuel pipelines. Methanol or ethanol in mixed fuels have strong permeability and solubility, which can easily cause hydrocarbons to seep out and thus fail to meet relevant environmental standards.

 

Zhang Ying has carried out research and development work on low-permeability and low-precipitation automotive fuel pipes. Through in-depth analysis of the physical properties of various raw materials, we developed materials that can be used in fuel lines, and developed PA12 symmetrical structure five-layer composite pipes that meet the low permeability standards of fuel lines, as well as a fuel line assembly system composed of composite pipes.

 

Typical applications of PA66 materials in automobiles
 

 

Under the general trend of "replacing steel with plastic" in automobile lightweighting, PA66 has contributed outstanding value in both traditional internal combustion engine vehicles and new energy vehicles, directly or indirectly realizing the social vision of low carbon emissions. In the production process of parts, PA66 can be quickly formed in the mold with a crystallization speed ten times that of PA6, greatly improving production efficiency.

 

9

PA66 Photo taken at the Sanfangxiang booth

 

Compared with PA6, the performance of PA66 is also extremely outstanding, with higher dimensional stability, lower water absorption and higher melting point. PA66 is widely used in various automotive systems in order to improve vehicle economy and reduce harmful gas emissions while maintaining or exceeding the existing power output.

 

Taking the intake manifold as an example, the early intake manifolds of internal combustion engine vehicles mainly used PA6 materials. With the application of integrated superchargers and the compactness of engines, the temperature resistance requirements of intake manifolds have increased from 130℃ to 200℃, and OEMs have gradually tended to choose PA66 with a higher melting point to achieve performance upgrades.

 

Another typical application of PA66 is the engine bracket or drive motor bracket. In the early days, such structural parts were generally made of steel or aluminum alloy. Because PA material itself has a damping and vibration reduction effect, the application of PA66 glass fiber reinforced products in engine and drive motor brackets can effectively reduce the vibration and noise of the engine or drive motor.

 

10

Asahi Kasei PA66 motor bracket Source: Asahi Kasei

 

In addition, since PA66 can withstand paint baking temperatures of 160 to 180°C, integrating it into the car's body-in-white not only helps to enhance the mechanical properties of the vehicle body, but also, when the vehicle collides, the PA66 reinforced material can effectively absorb the collision energy, maximizing the protection of the driver and passengers and the power battery. It can also reduce the weight of the vehicle body by more than 30%, improving the vehicle's handling and range.

 

11

Nylon 66 motor resolver sensor and speed sensor, taken at the BASF booth

 

In terms of research on new PA66 materials, many researchers have also developed PA66 materials suitable for specific automotive parts. For example, on-board chargers, DC/DC controllers, PTC heaters, and high-voltage junction boxes in new energy vehicles are all high-voltage components. High-voltage connectors between high-voltage components and high-voltage wire harnesses often use halogen-free flame retardant reinforced PA66, especially organophosphorus flame retardant PA66.

 

Halogen-free flame retardant reinforced PA66 has good flame retardant properties and mechanical properties, but its price fluctuates greatly due to the supply of upstream raw materials. The supply of PA6 raw materials is sufficient and the price is relatively low. Therefore, halogen-free flame retardant reinforced PA66/PA6 alloy has become a promising alternative technology solution.

 

Ye Bingbing et al. studied the changes in the flame retardant properties, electrical properties, mechanical properties, and heat resistance of the flame-retardant reinforced PA66/PA6 alloy when the proportions of PA66 and PA6 were different. They found that as the proportion of PA6 increased, the alloy The toughness index increased slightly, but the flame retardant performance and mechanical strength decreased slightly. As the proportion of PA6 decreases, the tensile strength decreases, but the toughness increases significantly.

 

PA66 is also used in new energy vehicle battery boxes. Liu Ying et al. conducted research on the mechanical properties of chopped carbon fiber-reinforced PA66 with different fiber contents, and conducted performance evaluation and simulation analysis of the material's application in lightweight battery boxes. The research results show that compared with the metal battery box, the chopped carbon fiber reinforced PA66 material box is 84% ​​lighter in mass, and the maximum stress of the box is reduced by 30% to 50% under bumpy roads and sharp turns. At the same time, It was also found that the carbon fiber content has a greater impact on the maximum displacement of the battery box. The increase in carbon fiber content can significantly reduce the box displacement under bumpy roads and sharp turns.

 

12

Concept solid-state battery pack, taken at the BASF booth

 

At present, most of the rolled strips over 30cm used in automobiles are made of PA66. PA66 has poor toughness under low temperature conditions and needs to be toughened and modified for cold resistance.

 

Lu Daguang et al. used a twin-screw blending method to select different types of toughening agents and PA66 raw materials with different viscosities to prepare cold-resistant toughened PA66 materials suitable for automobile rolled strips.

 

PA66 has good heat resistance, corrosion resistance and toughness, and can replace long-chain PA as the material of choice for automotive PA water pipes. However, due to the presence of strongly polar amide groups in the PA66 molecular chain, PA66 is prone to deformation and hydrolysis when in contact with coolant.

 

In response to this problem, Zhang Songfeng et al. first blended and modified the PA66 material by adding toughening agents and hydrolysis resistant agents to improve its hydrolysis resistance and toughness, and then used conventional hose extrusion processes to test the modified materials for hose extrusion, and successfully developed automotive cooling water pipes with PA66 as the main body. Through testing, the burst strength of the blended modified PA66 hose is greater than 2.6MPa, and its material cost is reduced by 40%, solving the problem of complex production process and high price of long-chain PA hose.

 

In summary, the amount of plastic used in vehicles can be used as one of the indicators to measure the level of automobile design and manufacturing to a certain extent. At present, the amount of plastic used per unit of internal combustion engine vehicles in developed countries is about 150kg, of which PA accounts for about 20%. The current amount of PA used per unit of domestic internal combustion engine vehicles is about 8kg, which is expected to reach 15kg in 2025 and is expected to increase to 30kg in 2030. Regarding the amount of PA used in new energy vehicles, referring to Tesla Model 3 and other models, it is estimated that the amount of PA used per unit of new energy vehicles in 2030 can reach 50kg.

 

According to statistics from the China Passenger Car Market Information Joint Conference, the national sales of internal combustion engine vehicles in 2022 will be 14.868 million vehicles, a year-on-year decrease of 2.302 million vehicles, and internal combustion engine vehicles are losing market share at an alarming rate. Domestic and foreign automakers generally announce that they will stop developing internal combustion engine vehicles around 2030, after which internal combustion engine vehicles will gradually withdraw from the stage of history.

 

At the same time, the new energy vehicle market has ushered in a rapid development. At the China Electric Vehicle Hundred People Conference, Ouyang Minggao, an academician of the Chinese Academy of Sciences, predicted that the national sales of new energy vehicles will reach 7 million to 9 million in 2025 and 17 million to 19 million in 2030. Huaan Securities Research Institute estimates that the use of automotive PA materials will reach 1.44 million tons in 2030.

 

In short, the advancement of engine technology, the transformation of automobiles to new energy, and the development of lightweight automobiles have effectively promoted the improvement of energy conservation and emission reduction levels and social operation efficiency, while also bringing huge incremental markets for the application of engineering plastics such as PA. In the foreseeable future, the automotive industry's demand for PA materials will continue to increase, and the PA material industry has entered a period of rapid development.

 

 

Send Inquiry