PP/PS Environmental Sheet Extrusion Line
Property
This PP environmental sheet production line is for producing multi-layer environmental-friendly sheet, which is widely used for vacuum forming, green food container and package, different kinds of food packaging container, such as: salver, bowl, canteen, fruit dish, etc.
Specialty
Developed by Jwell, PP sheet production line adopting maxim talc percentage in the sheet production, either customer will be able to reduce the cost of the sheet or increase the sheet degration character as well as gaining good physical properties and further processing abilities.
Technical Parameters
Model |
JWS150/120/90-1800 |
JWS150/60-1200 |
JWS130/60-1000 |
JWS120-1000 |
JWS100-800 |
|
Width |
1500mm |
1000mm |
900mm |
800mm |
600mm |
|
Thickness |
0.3-2mm |
0.3-2mm |
0.3-2mm |
0.2-2mm |
0.1-0.8mm |
|
Capacity |
1000-1200kg/h |
700-800kg/h |
550-600kg/h |
400-500kg/h |
300-350kg/h |
Process
Single screw extruder→ Hydraulic screen exchanger→Melt Pump→ T-die → Three roller calender→ Roller temperature controller → Cooling frame→Silicon oil coating unit(both sides)→Haul-off unit → Double position Winder →Crystallization and drying system → Electric control system
|
|
|
|
|
Single Screw Extruder |
Melt Pump |
Three roller calender |
Roller Temperature Controller |
PPB Pipe Grade:EP336C
Specifications: high impact resistance, high flow, low temperature resistance
Application: PPB cold water pipe fittings, vacuum forming panels
Remarks: light weight, high strength, corrosion resistance, no scaling, long service life
Polymer Type: Copolymer
Typical Values (Not Warranted Values)
| Performance | Test standard | standard range | Measured value range | |||
| Basic performance | Appearance | Visual | Natural | / | ||
| MFR(230℃,2.16kg) | GB/T 3682-2018 | 0.30~0.40g/10min | 0.36 | |||
| Mechanical performance | Tensile Strength at yield | GB/T 1040.2-2008 | 20~24 MPa | 27 | ||
| Flexural Modulus(23℃) | GB/T 9341-2008 | ≥620 MPa | 630-660 | |||
| Tensile Strain at break | GB/T 1040.2-2008 | ≥400% | 450-550 | |||
| Notched charpy impact strength | 23℃ | GB/T 1043.1-2008 | ≥50 KJ/m2 | 62 | ||
| -20℃ | ≥3.0 KJ/m2 | 10 | ||||
Note: The data in this table are typical values of product, for reference only, and the actual data can be found in " Certification Of Analysis"
This product has been tested by SGS and meets the requirements of "GB9693-1988Hygienic Standard for Polypropylene Resin for Food Packaging"
Package, Storage and Transportation:inner-coated woven bag, the net weight is25Kg/bag. The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air. During transportation, the material should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.

Hot Tags: pp/ps environmental sheet extrusion line, China pp/ps environmental sheet extrusion line manufacturers, suppliers, factory, PLA sheet Extruder, PP sheet production line, TPO geomembrane Manufacturing machine, pp formwork production line, Geomembrane and waterproof roll making machine, PET sheet Extruder
- Tel: +8613816974389
- Email: salsz@jwell.cn
- Add: Shanghai Haining Suzhou Changzhou Zhoushan Chuzhou Thailand Spain


















