PP Plastic Hollow Cross Section Sheet Extrusion Line
video
PP Plastic Hollow Cross Section Sheet Extrusion Line

PP Plastic Hollow Cross Section Sheet Extrusion Line

JWELL PP cross section sheet extrusion line.Thickness range: 2-7mm. Capacity choices: 250-350 kg/h; 300-400kg/h;400-450kg/h.Lead time: 3 months.
Send Inquiry
 
Property
 

 

JWELL PP cross section sheet extrusion line is quite mature  and common seen with following feature:

Thickness range: 2-7mm.

Capacity choices: 250-350 kg/h; 300-400kg/h;400-450kg/h.

Average lead time: 3 months after downpayment. 

PP Sheets Main Application:

Packing case, clapboard, backing plate, culet, reused container.

Key benefit of the sheet:  it's light and high strength, moistureproof, good environmental protection and refabrication performance. 

 

Specialty
 

 

JWELL PP hollow cross-section sheet production line is quite popular recent years. 

The quality ensurance part of the whole production line  is:  the calibration table.

JWELL advantage in calibration table of PP hollow cross-section sheet--express packaging production line:

1) The vacuum pump of the calibration table:

✸ Numerous vacuum gauges are neatly arranged to control the vacuum pressure in each area, and the left and right control is stable. The volume of each vacuum is single-controlled.

✸ Use an energy-saving vacuum pump with large displacement. Cyclone type.

Benefit: large displacement is good at ensuring the product quality, easy  for quality control. 

The disadvantage of the old water ring type is that the venue is not very hygienic.

2) Anti-falling device for calibration table: For the safety of maintenance, a pneumatically controlled anti-falling device is added.

Benefit: During maintenance, steadily prevent the falling of calibration plate,  to protect the safety of the maintenance personnel.

About the vacuum pump in PP hollow cross section sheet line extruder:

1) Vacuum pumps are usually not used in the production of PP cross section sheet line, because it is easy to cause pressure fluctuations. Usually poorer material of ABS, PP building materials need to use exhaust. If a customer needs to add 50% calcium powder particles in the raw material for PP hollow cross section sheet line, then a vacuum pump is needed.

2) Application of the vacuum pump: The raw material is petroleum, because the calcium powder absorbs water, it is necessary to drain the inhaled water, and suck away the volatile, water and oil stains. Usually, it is only added when the product quality requierment is high.

3) Highlights of JWELL PP cross section sheet line vacuum pump in the extruder: double-barrel switchable water ring vacuum pump. Advantages: It can be cleaned and maintained without stopping the machine, and has good stability.

 

 

Technical Parameters
 

 

Model

Product Width (mm)

Products Thickness (mm)

Design Capacity (kg/h)

Φ100&65

915

12-16

400

Φ150&90

2000

12-16

600

Φ100,Φ45

1220

4-40

350

Φ120,Φ45

2100

4-40

450

 

Key Machine List of the Lin
 

 

  1. Single screw extruder  2. Screen exchanger  3. Gear pump 4. T-die 5. Air knife 6. Calibration unit7. First haul-off unit8. Side trimming machine 9. Annealing oven 10. Cooling system by air 11. Cooling bracket 12. Second haul-off unit 13. Cross cutter and transmission unit 14. Auxiliary equipment15. Electrical appliances

  2.  

11

12

13

14

single screw extruder Screen changer Melt pump T-die

 

Client Case
 

 

 An Iran client has been communicating with JWELL for the past 2 years, and recently they are quite interested in getting a new line from JWELL to expand their capacity on PP plastic hollow cross section sheet  production. Being in the field of producing express packing sheet material for the past 20 years. They hope to use the mold they bought 20 years ago from JCTIME, as they have another one running in the line smoothly and they feel very satisfied. JWELL promise there won't be an issue for that. Then they provide the detail requirements on specific parts on the line: 

1-Hot-Air drier.  This part  must be steel with the capacity of one ton.

2-Single screw extruder. This part must have a vacuum and the diameter about 130-38

3-Special screen changer. The brand JC TIMES

4- Melt Pomp. The brand JC TIMES

5-calibration table (this part is very important so please send the picture and video of this part for us with complete explanation) 

6-First haul off unit (with 5 double rolls)

7- oven (the oven should be made of ceramic elements)

8-Second haul off unit (with 3 double rolls)

9- Cutter table

10. The material that is used for PP sheets is 50% pro poplin and 50% carbonate calcium.

From the detail requirments, we can see the client have hand on experience, but we also sugget not to use oven made of ceramic elements, as in one hand this line dose not need this, stainless steel one is mature and easy for mantainance, on the other hand, the price for ceramic elements is too high hard and easy broken, mantainance is not easy. Since they intend to have the latest design of the PP plastic cross section production line 2023, and specially interest to see videos and pictures of calibration table and vacuums in the line. We should our latest design and mature technology. They are quite convinced and would like to go with our up-to-date suggestions. 

Normally for PP plastic cross section extrusion line, we don't use vacuum in the main extruder, but for this client, due to the formula of 50% carbon calcium, we agree it is necessary to  add vacuum to ensure the quality of express packaging material.  And they are quite happy with our picture on vacuums for calibration table and singe screw extruder. 

Finally, we agreed to provide the customized line for them to produce express packaging material with width 2100mm, thickness: 2-6mm, capacity: 300-400kg/h. And the delivery will be 100 days after the down payment. 

 

FAQ

 

 

Q: Is this line the latest version?

A: Yes. 2023 new version.

Q: What is the speciality of JWELL PP hollow cross section line?

A: Calibration table is well designed for production and maintance, ensure the quality of products.

Q: Which part is the key of PP hollow cross section sheet line in terms of product quality?

A: Calibration table.

Q: What is the key advantage and benefit of JWELL PP hollow cross section sheet line calibration table?

A:1) Excellent vacuum pump.

2) Anti-falling device.

Q: Do we need to add vacuum pump in the main extruder on PP hollow cross section sheet line?

A: No, easy cause pressure fluctuations. For 50% carbon Calcium in the raw material, yes.

Q: What is the main function of vacuum pump in the extruder?

A: To pump water out of volatile matter, water and oil stains to ensure the surface quality of products.

Q: What is the advantage of JWELL vacuum pump in PP sheet line calibration table?

A:✸ Numerous vacuum gauges are neatly arranged to control the vacuum pressure in each area, and the left and right control is stable. The volume of each vacuum is single-controlled.

✸ Use an energy-saving vacuum pump with large displacement. Cyclone type.

Benefit: large displacement is good at ensuring the product quality, easy for quality control.

The disadvantage of the old water ring type is that the venue is not very hygienic.

 

High Transparency Grade

 

RP346R RP340P / RP344P RP348R

 

Specifications: colorless, transparent, high gloss, food grade

Application: Suitable for injection molding, injection stretch blowing, injection blow molding process, can be used for the production of various transparent products, generally used for dally transparent products, injection equipment, etc.

Remarks: This product is colorless granular with good transparency, high gloss, white color, crack resistance, good rigidity, good humidity no odor and other superior properties, this product has passed the food and drug management regulations test Detection of n-hexane extract and soluble matter in xylene of polypropylene in contact with food.

Polymer Type: Random copolymer

 

Typical Values (Not Warranted Values)

Performance Test standard Typical values
RP346R RP340P
Basic performance Appearance Visual inspection Natural
MFR(230℃,2.16kg) GB/T 3682-2018 25g/10min 20g/10min
Haze(1mm/Injection sample.%) GB/T 1040.2-2008 ≤12% ≤12%
Mechanical performance Tensile Strength at yield GB/T 9341-2008 25 MPa ≥25MPa
Flexural Modulus GB/T 1043.1-2008 ≥850MPa ≥850MPa
Notched charpy impact strength(23℃) GB/T 1633-2000 5 KJ/m2 ≥4.0KJ/m2
Thermal performance Vicat Softening Point(10N,50℃/h) GB/T 2410-2008 130℃ 130℃

Note: The data in this table are typical values of product, for reference only, and the actual data can be found in " Certification Of Analysis"

 

This product has been tested by SGS and meets the requirements of "GB9693-1988 Hygienic Standard for Polypropylene Resin for Food Packaging"

Package, Storage and Transportation:Inner-coated woven bag, the net weight is 25Kg/bag.

The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air. During transportation, the material should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.

product-589-727

Hot Tags: pp plastic hollow cross section sheet extrusion line, China pp plastic hollow cross section sheet extrusion line manufacturers, suppliers, factory, pp hollow sheet extrusion machine, PE waterproofing sheet Making machine, PET film factory, ABS sheet Extruder, pvc waterproofing sheet Making machine, PVC geomembrane Line

Send Inquiry