Home > News > Content

Simple 10-minute Maintenance: Solve The Problem Of Carbon Deposits And Blockages in The Extrusion Flat Die Head

Aug 05, 2025

In the plastic extrusion production process, the flat die is a critical molding component, and its operating condition directly determines the product's appearance, quality, and dimensional stability. However, the die's long-term operation under high temperature, high pressure, and high shear conditions can easily lead to problems such as carbon deposits, material blockage, and dimensional deviation. Failure to maintain proper maintenance can lead to serious consequences such as production suspension or even scrap.

Let's discuss the key points of flat die maintenance to extend die life and reduce equipment failure rates!

 

1. Why should we pay attention to mold maintenance?

 

news-1280-960

 

Maintaining a clean die flow channel ensures even melt distribution, preventing issues like uneven thickness, ripples, and surface defects in the finished product. Proper maintenance can reduce mold wear, corrosion, and deformation, extending its lifespan.

 

Scientific maintenance is far more cost-effective than frequent overhauls or mold replacements, reducing operating costs. Proactively identifying and resolving problems can avoid production downtime due to mold failures and ensure stable production.

 

2. Daily maintenance points (10 minutes a day)

 

news-1280-853

 

1. Spend 10 minutes daily checking the following:
· Check the die head for normal temperature control and overheating or uneven heating; · Check for material leakage, dripping, or material hanging; · Check the die head surface for carbides or debris; · Check for loose fasteners and the integrity of screws, flanges, and other components.


2. Daily Cleaning Recommendations
Use a special copper scraper or wooden stick to gently scrape away any debris adhering to the die mouth. Avoid using steel tools to prevent scratching the die cavity surface. Regularly wipe the die head surface with a non-woven cloth dipped in alcohol to keep it clean and tidy.

 

news-800-600
news-800-600

Use non-woven alcohol to wipe the die surface

 

When producing extrusion equipment such as flat die heads, Jewell fully considers the convenience of daily maintenance. The mold structure it designs is reasonable, which is convenient for staff to clean and inspect, providing convenience for efficient maintenance from the source.

 

3. Regular maintenance measures (recommended every 3 months)

 

news-1280-960

 

1. Clean the Mold Interior After shutting down the machine, disassemble the die head and clean the runners of carbon deposits and char. Use a specialized cleaning agent (such as a release agent or extrusion cleaning compound) or a low-melting-point cleaning compound to flush the interior. If the blockage is severe, heat the mold in a heating oven to soften the residual material before manually removing it.


2. Inspect for wear and corrosion. Focus on inspecting the die lip and cavity for obvious wear or corrosion. Minor wear can be polished; severe damage should be promptly repaired or replaced.


3. Lubrication and Rust Prevention: When the die head is not in use for an extended period, be sure to apply anti-rust oil to the surface and store it sealed. Apply high-temperature grease to the screws to prevent seizure and rust. 

 

news-1280-960

 

4. Common Problems and Solutions

 

In addition, the heating and cooling processes should be carried out gradually to avoid mold cracking due to large temperature differences; the die head is prohibited from extruding material before the set temperature is reached to prevent damage caused by forced advancement; when disassembling the mold, pay attention to symmetry and uniform force to prevent dislocation and deformation; operators should be trained to master the correct mold usage specifications and maintenance procedures.

news-800-600
news-800-600

 

 

Send Inquiry