It is well known that the plastic extruder consists of kneading system, transmission system and heating and cooling system. Kneading system includes screw, barrel, hopper, head and mold. The main machine of plastic extruder is extruder. The plastic is plasticized into uniform melt through kneading system, and under the pressure established in this process, it is an extruder head connected by screws. The machine head is composed of an alloy steel inner sleeve and a carbon steel outer sleeve. The machine head is equipped with a forming die. The function of the machine head is to convert the rotating plastic melt into a parallel linear motion, guide it into the die sleeve evenly and smoothly, and give the plastic the necessary forming pressure.
The plastic pipe extruder is plasticized and compacted in the barrel, and flows into the head forming mold through the neck of the head along a certain flow path through the porous filter plate. The core and mold sleeve cooperate properly to form an annular space with a continuously decreasing section, so that the plastic melt forms a continuous dense tubular coating around the core wire. In order to ensure that the plastic flow channel in the head is reasonable and eliminate the dead corners of accumulated plastic, a shunt sleeve is usually arranged. In order to eliminate the pressure shake during plastic extrusion, the head with pressure equalizing ring is also equipped with die calibration and adjustment equipment to facilitate the adjustment and calibration of the concentricity of the die core and the die sleeve. The extruder divides the head into bevel heads according to the angle between the head material flow direction and the screw base line. This kind of equipment also includes twin-screw extruder, rubber extruder and plastic pipe unit, etc.
Plastic film blowing machine is a device that heats and melts plastic particles and then blows them into film. It is widely used. We all hope that the equipment we buy will last as long as possible. Then, how to prolong the service life of pipe extrusion machinery? According to the summary and analysis of Shiyan machinery, the following points should be achieved in order to ensure the better use effect of plastic extrusion machinery and prolong its service life.
1. Correct operation. In fact, many plastic film blowing machines fail because of improper operation. In fact, when we buy the equipment, we will have special personnel to tell us how to operate it. Of course, there are corresponding instructions. It is operated by a specially assigned person, so that some unnecessary damage can be avoided after training, and its service life can be prolonged.
2. Regular inspection. Even if the plastic film blowing machine is used every day, it is impossible to have no abrasion at all, so it should be tested regularly. Special attention should be paid to the parts that are easy to wear. Before each use, check whether there is any problem with the power supply. In this way, problems can be solved in time, and the equipment can be used for a longer time.
3. Regular maintenance. If there is a fault in the process of use, we can find a regular maintenance business to deal with the maintenance problems. The maintenance of the plastic film blowing machine is complex, and it is difficult to determine the fault problem only from the surface fault, so it is still necessary to have professional after-sales service personnel to help deal with it, so as to ensure that all maintenance work can be completed in a short time.











