The lightweighting potential of every automotive component is being investigated. This includes both internal combustion engines (ICE) and electric vehicles (EV). Advanced plastics and plastic composites can significantly improve vehicle performance.
Fiber-reinforced engineering plastic composites are 25-35% lighter than steel parts of equal strength. New materials also have applications in:
1. More use of plastics/composites in body panels;
2. Long continuous fiber technology for structural parts;
3. More use of carbon fiber reinforced plastics in parts such as structural parts due to the development of low-cost composite materials;
4. Polycarbonate and acrylic as glass for roofs, headlights and taillights;
5. Application of advanced nylon under the hood.
Plastic suppliers are also tailoring materials to meet automotive sustainability and lightweighting goals.
(EV) Formula Electric Racing Materials
Genbeta is the world leader in electric vehicle (EV) Formula E racing. It recently set a Guinness World Record at the world's first all-electric FIA World Championship. The record is for the fastest speed achieved indoors. The speed achieved was 218.71 kph (kilometers per hour) or 135.9 mph (miles per hour).
Its key thermoplastic components include:

Front Wing Endplates – Front wing endplates are 3D printed in a variety of materials. For example, polypropylene (PP) copolymer, polycarbonate (PC) or polybutylene terephthalate (PBT)/PC blends. They are mounted on the outboard end of the vehicle's front wing. They are an integral part of redirecting airflow around the front wheels. They reduce drag while maintaining downforce and stability for the car.
Wheel Fins – Wheel fins are injection molded parts. They use mechanically recycled thermoplastics from SABIC, such as STAMAX™ polypropylene (PP) copolymer. These contain post-consumer waste based TRUCIRCLE™ round materials. They are mounted on the rim in a radial spoke pattern. This in turn optimizes airflow. It also reduces aerodynamic drag for higher speeds and cools the brakes for improved stopping power.
Wind Deflectors – Wind Deflectors are extruded clear polycarbonate (PC) sheet parts. They use bio-renewable, low-carbon materials from SABIC's TRUCIRCLE™ portfolio. They are mounted on the front of the race car cockpit, in front of the driver. Thus, it optimizes airflow to reduce drag, ultimately increasing speed performance.

Genbeta electric racing car (left), front wing end plate/wheel cooling fin (center), wind deflector parts (right)
(Source: SABIC)
PA6 used in windshield beams
Wipag polyamide 6 recycled carbon fiber composites are used for the windshield crossbar of the BMW iX electric vehicle (EV). The upper structural component of the EV windshield is made from the WIC PA6 15 BK IM compound. It is made using injection-molded metal hybrid technology, utilizing carbon fiber waste from BMW's carbon fiber composite manufacturing unit.

PA6 recycled carbon fiber compound windshield in BMW EV cross member
(Source: Wipag)
The windshield structural crossbeam also consists of metal inserts and carbon fiber rods. It is an impact-modified grade with the following advantages:
1. Good mechanical performance
2. Lightweight, sustainable, circular economy alternative solution
In addition to meeting mechanical requirements, recycled carbon fiber can also reduce carbon footprint. 1 kilogram (kg) of WIC PA6 releases about 6 kilograms of CO2 equivalent (eq.), while 1 kg of virgin carbon fiber releases about 9 kilograms of CO2 equivalent when manufactured.
LFT improves dimensional stability of skylight frames
GS-Caltex's HiPrene® ALG14BF polyamide 6 long fiber thermoplastic (LFT) compound is used in the panoramic sunroof frame of the Hyundai Kia Sorrento. Inalfa Roof Systems in South Korea injection molded the sunroof frame using the GS-Caltex compound.
This is the first time that flat glass fibers have been used instead of the traditional round glass fiber reinforcements. This provides the sunroof with the following properties:
1. Improved dimensional stability
2. Reduced warping

Kia Sorrento's sunroof frame uses PA6-based LFT
(Source: GS-Caltex)
Torsion pultrusion is a new technology used to produce LFT pellets. This allows the fiber length to exceed the plastic pellet length. It can improve mechanical properties.
Compared to the previous standard steel frame, the part weight was reduced by 51%. The total number of part mergers dropped from 33% to 4%. Glass-filled LFT has a 13% increase in bending-torsion stiffness compared to carbon fiber reinforced LFT. Likewise, it also achieved a 25% improvement in part breaking force at a 24% lower cost.
Flame retardant LCP
Solvay has developed its latest high-temperature resistant liquid crystal polymer (LCP), Xydar® LCP G-330HH. This LCP compound grade is inherently flame retardant, without the use of halogen or bromine additives. It maintains electrical insulation properties after exposure to 752°F (400°C) for 30 minutes. It features:
1. Glass-filled,
2. Easy to flow,
3. Injection moldable.
Automakers are moving from 400V to 800V for the next generation of electric vehicles (EVs). This is because global regulations are increasing the heat resistance of battery components. They need to withstand temperatures from 300°C to 1000°C for up to 15 minutes.
Xydar® LCP G-330 HH improves safety, allowing passengers enough time to exit the electric vehicle in the event of a battery thermal runaway fire. Its target application is thin-walled 100x150x0.5 millimeters (mm) thin film insulation panels for EV battery modules.

Recycled PA for automotive and other applications
DOMO has developed TECHNYL® 4EARTH® polyamide 6 (PA6 or Nylon 6) and polyamide 66 (PA66 or Nylon 66). It reduces the environmental impact of polyamide parts to a level never before achieved, as evidenced by the life cycle results.
It has 80% lower CO2 emissions, 70% less water consumption and 60% less energy in the manufacturing process. The grades are targeted for a recycled content of 20% or more. They have a carbon fiber or glass fiber content of up to 50%.

TECHNYL® 4EARTH® Sustainable Recycling of PA6 and PA66
(Source: Domo Engineered Materials)
Main applications include:
1. Automotive bearing cages, transmission housings, oil pans, oil separators, cylinder head covers, intake manifolds and transmission covers;
2. Electrical, household and gardening appliances;
3. Consumer/industrial products such as insulation materials/window profiles, furniture components, industrial components, sports and leisure equipment and agricultural tools.
Recycled PC for transparent headlight cover
Covestro brings its circular economy polycarbonate (PC) expertise to the Nalyses automotive headlamp project. It is funded by the German Federal Ministry of Education and Research, led by HELLA. It focuses on the development and design of today's transparent headlamp covers. It also looks at their reuse, remanufacturing or end-of-life material recycling. The move aims to create a high-value recycled PC raw material base covering the entire product life cycle.
Covestro conducted research on modular headlamp concepts. This is based on different types of polycarbonate and aims to reduce: assembly steps, space requirements, costs, and CO2 emissions.
Focusing on one plastic (such as a designated PC) reduces labor costs. Labor costs are required to separate, sort and store them in the recycling stream without sacrificing performance. The Nalyses consortium includes HELLA (headlamps), Covestro, BMW, geba Kunststoff compounds, Fraunhofer Institute for Mechatronic Systems Design IEM, Heinz Nixdorf Institute and Hamm-Lippstadt University of Applied Sciences. The results of their project are planned to be transferred to other industries.

Recycled PC sustainable transparent car headlights
(Source: Covestro)









